Shutting Down the Water Main: A Homeowner's Handbook
Shutting Down the Water Main: A Homeowner's Handbook
Blog Article
Are you currently searching for selective information on How to Locate & Turn Off Main Water Shut-Off Valves?
If you attempt to shut the water off to your fixtures by utilizing an angle stop which does not work you will have to shut of the water main to make your repair service. There are additionally lots of other reasons you might need to close the water main like fixing frozen pipes, fixing leaks, replacing fixtures or taps.
Lots of people are not conscious that they even have a water main valve right in their very own residence and also just call a plumber of never ever wind up doing the repair service up until points get really bad because they simply do not know that closing the water pipe is really easy.
The most usual places a water main will be situated in home remains in your boiler room, cellar, or an eliminated panel in an area for your house.
Once you find the water pipe you will just transform the valve clockwise to shut all the water off in your house until you have actually completed the repair service. Some homes will enjoy valve with a bar that you can draw rather than look to shut the water off.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
I ran across that piece on How to Turn off the Water for Plumbing Repairs when surfing around the web. Loved our piece? Please share it. Let somebody else find it. I recognize the value of reading our article about How to Turn off the Water for Plumbing Repairs.
Plumbing insights available. Report this page